SRM Conversion Kit 5x Lite (Older Fanatec Wheels)

The SRM Conversion Kit 5x Lite conversion kit uses the same electronics as the 5x kit but this version allows fitting to the older Fanatec wheels. If your Fanatec wheel has the older style QR with a round back and the bolts that come through the wheel and into the QR, then this is the kit you need.

PC ONLY
The SRM Conversion Kit 5x Lite conversion kit uses the same electronics as the 5x kit but this version allows fitting to the older Fanatec wheels. If your Fanatec wheel has the older style QR with a round back and the bolts that come through the wheel and into the QR, then this is the kit you need.

PC ONLY

Fitting your wheel to a wheelbase
The conversion kit comes with mounting holes for most mounting solutions.

• 6 x M5 threaded holes on 70mm PCD
• 3 x M5 threaded holes on 50.8mm PCD
• 3 x M5 threaded holes on 52.0mm PCD (Fanatec specific)

You can bolt the kit directly onto a wheelbase plate. If bolting directly it is recommended to use our 40mm spacer so that applying the bolts is easier.

All popular quick-release systems can be bolted to the conversion kit.

Notes:
Please remember that 2 threaded holes cannot be bolted together.
You require one side to be threaded and the other must allow the M5 bolt to pass through.
It is very easy to drill out a threaded hole with a 5mm drill bit if needed.
It is recommended that you drill the threads from the QR rather than the conversion kit where possible.

A few quick-release systems must be bolted from the wheel side. For example the AccuForce QR. This will need an additional mounting solution. (Available as an extra)