Fanatec ClubSport Pedals V3 Brake Performance Kit

ClubSport Pedals V3 Brake Performance Kit

Gain the maximum advantage
The human body memorizes muscle tension much better than foot position. This is why all car brakes measure the pressure and not the travel. Race and F1 cars have almost no travel at all.

COMPATIBLE WITH CLUBSPORT PEDALS V3

This Brake Performance Kit is the perfect upgrade for your ClubSport Pedals V3 (inverted), increasing the brake pressure point feeling by reducing the brake pedal travel and providing a higher brake pressure capability.

INSTALLED AT THE PRELOAD SCREW

The red and/or green Elastomer springs and the short Polyurethane spring will be installed to the preload screw of the brake unit.

MIX & MATCH!

There are 8 resistance and travel options with the combinations of the red and green Elastomer springs and their two diameters. The PU foam spring is an optional component to set up a lighter start force which will double the amount of possible configurations to 16.

GREEN ELASTOMER SPRING

The green Elastomer spring is the harder material version. For fine-tuning, two thicker and harder ones (Ø 13mm), as well as a thinner and softer one (Ø 12mm), are included, both 20mm in length

RED ELASTOMER SPRING

The red Elastomer spring is the slightly softer material version. Also, two thicker and harder ones (Ø 13mm) as well as a thinner and softer one (Ø 12mm) are included, both 20mm in length.

Disclaimer:

All warranty, RMA & technical issues with this product will be handled directly through Fanatec. We can handle these communications on your behalf or transfer the warranty over to you. Please get in contact with us if any issues arise.