PRO SIMRIG PSR3 - SIMAGIC Edition

PRO SIMRIG PSR3

Not all rigs are created equal. The thought process behind the PSR3 was “how do we squeeze as much rigidity out of a value oriented cockpit, without losing adjustability”.

This new SIMAGIC Alpha Edition has a new bespoke Front Mount for a clean aesthetic when using an Alpha Mini, Alpha or Alpha U wheelbase.

PSR3 is blessed with the same ultra heavy duty profiles that are used on the PSR1. Significantly thicker side walls provide more mass, more weight and more rigidity than its competitors.

For the uprights, the steering section is of an overlapping design. This uses more material and costs more, but the result is a better anchor for the wheel deck to be supported by the rig perimeter.

The wheel section uses the same extremely rigid design of the PSR1. It uses a 10mm thick aluminium wheel deck, mated to profile and adjustable side plates.

PSR3 has a great pedal section. It's design is an evolution of the PSR1, where two 10mm aluminium plates sandwich two 80mm profiles, mounted with 8 direct fixings. Many drivers prefer a very stiff brake setup, and so the PSR3 had to be built with that in mind. Other designs often suffer with flex in the pedal section, primarily down to cost savings on material and design choices.

BRACED SIDE MOUNT INCLUDED AS STANDARD

Continuing with the idea of "overlap = strength", the PSR3 includes a braced side mount. This reduces lateral movement when shifters or handbrakes are attached to the side mount.

To help you find the perfect height, two different mounting heights allow an 80mm level of adjustment in 1mm increments.
The side mount comes with 1 x 40x80x490mm profile, and 1 x 40x40x350mm profile.
The side mount can be attached to either the left or right of the PSR3 cockpit.

SIMAGIC Alpha Edition WHEELBASE COMPATIBILITY

The PSR3 SIMAGIC Alpha Edition provides a bespoke Front Mount bracket for a clean aesthetic.

The PSR3 can also handle the strongest Alpha U. That being said, we recommend going for the PRO SIMRIG PSR1 if you are running this wheelbase at the highest  torque settings to minimise vibration.

Wheelbases in bold are recommended for the PSR3 SIMAGIC Alpha Edition. Wheelbases not in bold are recommended for the PSR1.

• Pre-drilled holes for front mounting exist for the following wheelbases:
• SIMAGIC Alpha Mini
  
• SIMAGIC Alpha
• SIMAGIC Alpha U
  

WIDE Pedal Compatibility

It is common knowledge that the most consistency is gained through the brake pedal. With that in mind, the PSR3 has a pedal deck that has wide compatibility with top end pedal systems.

• Compatible pedal systems using the manufacturers baseplate:
• SIMAGIC P500 / P1000 / P1000i / P2000
• Fanatec CSL / CSL (+LC) / V1 / V2 / V3 (+inverted)
• Venym Atrax
• Heusinkveld Sim Pedals Sprint / Ultimate / Ultimate+
• Meca Cup1 / Evo1
• BJ Steel
• Asetek Forte / Invicta
• Moza S-RP / CRP
• SimTrecs ProPedal GT
• SimCoaches P1 / SimCraft PRO / ImSim Talento