Sale!

T7 Pro (6 DOF)

Starting at £26,999.00 – £33,299.00

The T7 Pro simulator was designed and manufactured in France to meet the requirements of professional drivers for their training.

The T7 Pro has 6 Degrees of Freedom (6DOF). It also simulates oversteer and understeer (rear and front traction loss) to meet the demands of drivers and to be as close to real driving as possible.

On the market, there are traditional 6 DOF simulators (commonly referred to as the Stewart / Hexapod platform) which are fine for aeroplane piloting, but not suitable for car driving because they do not properly imitate oversteer and understeer (rear and front traction loss).

The T7 Pro has been designed for automotive simulation and aeroplane simulation, it can also be used for truck simulation, training or leisure centres (more than 100 compatible games) as well as for research and development.

Note: Unlike the T1000 7M there is only one version of top platform actuators, due to the narrower top frame.

Made in France with Quality and Passion by ProSimu, The largest choice of simulators in the world.

Bottom Platform Actuators

Clear

Upgrade to PRS200R Edition (Robust / Professional use)

Seat

Shifter Bracket

Handbrake Bracket

Monitor Stand

Keyboard Support

OMP / Sparco Safety Harness

Options Price: £0.00
Product Price: £26,999.00
Total: £0.00

— OR —

SKU: PSU_T7PRO Categories: All Rigs Stands and Accessories, Flight Sim Rigs & Stands, Motion Platforms, Motion Rigs, Prosimu Platforms, Prosimu Professional, ProSimu Shop, PS Platforms, Sim Rigs & Stands Tags: 6 DOF, Chassis, Pro, ProSimU, T7

Description

The T7 Pro simulator was designed and manufactured in France to meet the requirements of professional drivers for their training.

The T7 Pro has 6 Degrees of Freedom (6DOF). It also simulates oversteer and understeer (rear and front traction loss) to meet the demands of drivers and to be as close to real driving as possible.

Note: Unlike the T1000 7M there is only one version of top platform actuators, due to the narrower top frame.

Made in France with Quality and Passion by ProSimu, The largest choice of simulators in the world.

Additional information

Weight	200 kg
Brand	Prosimu
Bottom Platform Actuators	PRS200 – 100mm, PRS200 – 150mm, PRS200 – 200mm

Actuator Selection

Choice of actuators according to your main use

Comparison

In car simulation, speed and acceleration are needed to give you impact when braking and accelerating. With 280mm/s and 2G of acceleration, our simulator will give you the best sensation on the market.

With 44 movements/second, our PRS200 ProSimu actuators allow you to feel the effects of the road and the vibrations in a much more striking and realistic way than a traditional hexapod. The 44 movements/second are only possible by using our high end servo drives fitted to the PRS200 actuators with a high speed CanBus communication (10Mbit/s ISO 11898). The actuators equipped with servo-drives with a Modbus type communication (115 Kbit/s with maximum of 5 movements/second) have a lot of latency, meaning the immersion will be lessened and the effects/vibrations of the road less realistic.

Some platforms equipped with a geared motor (with lots of gears and cogwheels) will have an even higher latency, so less reactivity and will give the impression of being on a boat on the sea rather than in a racing car. The low platform height (43 cm) allows for a lower centre of gravity to feel your vehicle even better.

Our simulator allows you to feel the loss of traction at the rear and front, unlike other 6 DOF simulators (Hexapod type) which are not designed for this. After three years of research and development, the patented ProSimu T7 Pro is the only 6 DOF simulator with the unique technology to allow for simulation of oversteer and understeer, with the sole objective of being as close as possible to real driving.

Whether you are a professional pilot, Gentleman driver, Sim-Racer, or just and enthusiast, the T7 Pro is the simulator for you!

Technical Specification

The T7 Pro simulator is equipped with 7 ProSimu PRS200 private use actuators (choice of 100/150/200 mm of travel), and a choice to upgrade to the PRS200R (for intensive use/professional use) for a breathtaking experience.

This dynamic chassis offers movement on 6 Axes, and a travel of up to 200mm and 2G of acceleration on each of its 7 actuators or axes.