ProSimU T1000AL 7M [Aluminium]

Comparison

Comparative table

In the simulation, speed and acceleration are needed to give you impact when braking and accelerating.
With 280mm / s and 2G of acceleration, our simulator will give you the best sensations on the market.
With 44 movements / seconds, our PRS200 ProSimu actuators allow you to feel the effects of the road and the vibrations in a much more striking and realistic way than a traditional hexapod.
The 44 movements / second are only possible by using our high-end servo-drives fitted to the PRS 200 actuators with a high speed CanBus communication 10Mbit / s ISO 11898.
The actuators equipped with servo-drives with a Modbus type communication (speed of 115kbit / s with maximum 5 movements per second) have a lot of latency, the immersion will be less and the effects / vibrations of the road less well felt.
Some platforms equipped with a geared motor (with a lot of gears and cogwheels) will have an even higher latency so less reactivity and will give you the impression of being on a boat at sea rather than in a racing car.
The low platform height (43 cm) will allow you to have your center of gravity lower and to feel your vehicle even better.
Our simulator therefore allows you to feel the loss of grip at the rear and the front (oversteer and understeer) unlike other 6 DOF simulators (Hexapod type) which are not designed for this.
After three years of research and development, the patented ProSimu T1000 7Motions™ is the 6 degrees of freedom (6DOF) simulator with unique technology: simulation of oversteer and understeer, with the sole objective of being as close as possible to driving. real.

The T1000 7 Motion ™ is the new benchmark among 6 DOF dynamic simulators thanks to the 2 additional effects of oversteer and understeer and its ProSimu PRS 200 actuators having been specially created for automotive and aeronautical simulation.

Whether you are a professional pilot, Gentlemen Driver, Sim-racer or just an enthusiast, the T1000 7Motions™ is the simulator for you!