Monte Carlo Race Number Rear Seat Sticker

Name: Monte Carlo Race Number Rear Seat Sticker
Brand: SIM Demon
SKU: SD-SG_MS
Availability: InStock

£8.00

Do you want your rig to stand out in our room? or let others really know who’s spectacular sim setup it actually is!
Each sticker is ready to be stuck to the rear of your rig seat, or even your PC case.

Please contact us for lead time

SKU: SD-SG_MS Category: Rear Seat Graphics Tags: case, Custom, Graphics, Monte Carlo, pc, Race, Rally, Rear, seat

Description

Number your Rig or personalise with initials – the choice is yours . . .

Do you want your rig to stand out in our room? or let others really know whose spectacular sim setup it actually is!

Each sticker is ready to be stuck to the rear of your rig seat, or even your PC case.
The sticker is sized at: 200mm x 200mm

Printed on quality branded vinyl with air release backing system, only use Eco-solvent vibrant inks.
Laminated for extra protection from marks and scratches.
Self-adhesive vinyl is Ideal for curved surfaces such as cylinders. Quick and easy to apply.
Suitable for indoor and outdoor use when applied to smooth, dry clean surfaces (But who has their rig outside!!)

Fitting Instructions:
Please see tab above

Additional information

Weight	0.1 kg
Dimensions	20 × 14.8 × 0.5 cm
Brand	SIM Demon

Fitting Instructions

Clean the surface: Use a clean, dry cloth to wipe down the surface where you plan to apply the vinyl sticker. Make sure it’s free of any dust, debris, or oils that could affect adhesion.
Position the sticker: Position the vinyl sticker on the surface, and use tape to hold it in place if necessary. Check the alignment and make sure it’s centred and straight.
Peel the backing: Carefully peel the backing off the sticker, starting at one corner. Be sure to pull it back slowly and evenly to avoid any stretching or tearing.
Apply the sticker: Slowly press the sticker onto the surface, starting from one edge and working your way to the other. Use a squeegee or a credit card to smooth out any bubbles or wrinkles.
Allow it to dry: Allow the sticker to dry for at least 24 hours. This will give it time to fully adhere to the surface.